The InfraLIGHT Stand-Alone Sensor range meets the need for a combined lux and occupancy sensor to provide switched-circuit lighting control.
Other models are available to provide Analog (0-10V) and DSI dimming control.
The moulded housing is styled to blend unobtrusively with modern décor.
Based on a proven design used successfully in more than 10,000 installations, the sensors are optimised for partial body movement to ensure reliable lighting within an office environment, but have a very high degree of immunity to false triggering.
Mounting into suspended ceilings is achieved via a fixing ring to secure the unit in place where the ceiling void is accessible or with a spring clip for blind fixing. Alternatively, a hard surface mount a version is available with a ceiling receptacle and wiring access is provided through a 20mm round conduit entry.
An installer’s remote control is used during commissioning to command the unit to transmit a service pin message without the need to de-mount the device or climb a ladder to the ceiling. The remote control can also used to initiate a test of the occupancy detection, store the current light level as the light level setpoint and adjust the occupancy hold times.
- Attractive, compact appearance.
- No other controller required, wires directly to fittings.
- Cyclable control modes including normal working mode, test mode, light level mode, occupancy delay time selection.
- Adjustable occupancy hold times of 4, 8 and 16 minutes.
Please visit www.infranet-partners.co.uk to view prices and availability.