InfraLIGHT Stand-alone Sensors (Surface Mounting)

The InfraLIGHT Stand-Alone Sensor range meets the need for a combined lux and occupancy sensor to provide switched-circuit lighting control.
Other models are available to provide Analog (0-10V) and DSI dimming control.
The moulded housing is styled to blend unobtrusively with modern décor.
Based on a proven design used successfully in more than 10,000 installations, the sensors are optimised for partial body movement to ensure reliable lighting within an office environment, but have a very high degree of immunity to false triggering.
Mounting onto hard surfaces is achieved via a ceiling receptacle and wiring access is provided through a 20mm round conduit entry.
An installer’s remote control is used during commissioning to command the unit to transmit a service pin message without the need to de-mount the device or climb a ladder to the ceiling. The remote control can also used to initiate a test of the occupancy detection, store the current light level as the light level setpoint and adjust the occupancy hold times.


  • Attractive, compact appearance.
  • No other controller required, wires directly to fittings.
  • Cyclable control modes including normal working mode, test mode, light level mode, occupancy delay time selection.
  • Adjustable occupancy hold times of 4, 8 and 16 minutes.

Please visit to view prices and availability.

If you find any faults with the operation of this website, please Click Here